External Aluminium Venetians from Evaya

The 80 C Rolled Edge Slats of the ev80 are manufactured from aluminium reinforced with copper free aluminium alloy to provide added strength and flexibility. The material is 0.45 mm gauge, chemically pre-treated and stove enamelled. Roll formed and machined on our premises utilising the most advanced technology and operating systems.

Slats are scratch, shock and corrosion resistant and available in a range of Standard Colours with Project Specific Alternatives and Custom Colours available upon request.

Tilting & Lifting Devices:

• Bearings: located in the 56 x 58 mm extruded aluminium head rail, enable the slats to alter angle direction smoothly and efficiently
• Ladderbraid: Upon which the blind slat is either rested or fastened (refer to omega punching) is woven and reinforced with Kevlar/ Aramid fibres
• 8mm Texband Anti-Friction UV Stable Lift Tape is utilised to raise and lower the slat bundle
• Omega punching of aluminium slats, a process by which a horse shoe shaped cleft is machined at various intervals along the length of the slat and through which the ladder braid is fastened, acts to ensure the correct spacing between blades and enhances both incremental adjustment of slats and inherent wind stability of the blind.

Profiles, Side Channels & Pelmets:

• Extruded with non-corrosive aluminium alloys.
• Available in a range of finishes, including anodised and powder coat colours.
• Designed and engineered by evaya.