Non Acoustic Glass Stacker Doors from Bildspec

Overview

Bildspec's Non-acoustic Glass Stacker door is perfect for non-acoustic applications which don't require a bottom acoustic seal. Examples are shopfront tenancies, reception areas, shopping centres, hospitals, hotels, clubs and more. This door is built from extruded aluminium making it lightweight and strong.

Typical Specifications

Bildspec's Non-acoustic Glass Stacker doors.

Door Opening:

Bildspec to fix to square and level vertical members (by others) and an overhead structural support beam (by others) (capable of supporting the weight of the door with no deflection or sag) to within 10mm tolerance. Floor deviations/ramped floor levels from left to right of the opening can be catered to up to 25mm can be tolerated. Ramped floor levels externally to internally must not exceed 25mm from the centre line of the track to 1000mm on either side of the track. Recommend LVL either structural laminated timber or structural steel approved by an engineer.

Sizing:

Notes: The maximum panel width is always 750mm and the maximum an individual panel can weigh is 40kg. The minimum height is 1000mm on top of the track to FFL.

Where possible please consult each door design with your local Bildspec representative.

Panel Fill-in Options:

Operation:

Doors are manually operated on a 41mm high x 36mm wide extruded aluminium overhead track with commercial-grade wheels. The doors can stack to one side or both sides depending on side room clearances. Hanging and hinging members utilise stainless steel hardware.

Bildspec's Non-acoustic Glass Stacker doors.

Locking:

Locks (operable from either inside or outside depending on stack requirements) mounted in the vertical stiles secure the door in position via shoot-bolt locking into the floor only. The bottom bolt locks into floor-mounted sockets with a spring-loaded cap. All locks are supplied with "construction key cylinders" which are keyed-alike. Master keying by others.

BCA-compliant egress locks for emergency exit requirements can be incorporated and are operable with a single down action handle.

Door Finish:

The standard door finish is natural anodized aluminium. Doors can be powder coated to standard Dulux or Interpon colours at an extra cost.

We have provided an indicative stacking table but please contact your Bildspec representative for confirmation before finalising your stacking capability or housing build (by others).

Bildspec reserves the right to alter specifications without notice. Please visit bildspec.com.au for more information.