Waterproofing Foam SealBoss 1510 Water-Stop-Foam Video from Bayset

SealBoss 1510 Water-Stop-Foam™
Versatile Polyurethane Water - Cut - Off Injection & Soil Stabilization Foam Grout

SealBoss 1510 Water-Stop-Foam is a hydrophobic water cut- off hydro / water activated injection foam grout and soil stabilization grout based on a MDI (methylene-diphenylisocyanate) polyurethane. The resin is 100% solvent free and 100% solids. The gel-time of the product is adjustable by the mandatory adding of a certain percentage of 15x Accelerator.

Upon contact with water 1510 Water-Stop-Foam reacts to a seal foam while expanding its volume 30 to 40 times. The cured material is semi flexible and of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not effected by water or dryness. The reacted material does not shrink or swell.

Depending on the amount of accelerator added and the pressure of injection, 1510 Water-Stop-Foam reacts to a very dense, closed cell, semi rigid material or a more open cell, semi flexible product. For best waterproofing results the closed cell structure is desired.

Water stop foam for infiltrating and gushing water:

- Defective Concrete (Cracked or Honeycombed)
- Concrete Joints and Cracks
- Limestone
- Brick Construction
- Pipe Intrusions
- Waste Water Tanks
- Drinking Water Reservoirs
- Sewers, Manholes, Utility Boxes, etc.
- Tunnels, Dams
- Soil Stabilization