Mapefix PE SF is recommended for anchoring elements in place, such as:

• Plant equipment;
• Sanitary fittings;
• Aerials;
• Signs;
• Window and door fittings.

Technical Characteristics

Mapefix PE SF is a two-component chemical anchoring product, packaged in 300 ml cartridges with two separate compartments containing component A (resin) and component B (catalyser), at the correct mixing ratio in volume. The two components are mixed together when they are extruded via the static mixer supplied with the cartridge. The mixer is screwed to the end of the cartridge, and no preliminary mixing of the two components is required. If only part of the cartridge is used, the remaining product may be used, even after a number of days by replacing the original static mixer with a clean, new one.

Mapefix PE SF does not contain styrene which makes it suitable for use in areas with poor ventilation and, because it has limited shrinkage, it is also suitable for anchors with small circular crests.

Mapefix PE SF is a chemical anchor made from a mixture of styrene-free resins, suitable for application on solid and perforated building materials, such as:

• Non-cracked concrete;
• Lightweight concrete;
• Cellular concrete;
• Masonry;
• Bricks;
• Stone.

Mapefix PE SF is applied in holes made with a drill or hammer drill. We recommend using only a drill on perforated substrates.

Mapefix PE SF is certified according to ETA European Standards option 7 (anchors in concrete in tension zones).

The Mapefix PE SF 300 ml size cartridges may be used with conventional silicone extrusion guns for 50 mm diameter cartridges, as long as they are robust enough.