NuWrap 5 Premium Acoustic Lagging from Thermotec Australia![]() Thermotec Australia is pleased to announce that its' NuWrap 5 product has been successfully tested and complies with the Green Building Council and Green Star requirements for low VOC emissions. Recent acoustic testing also confirms that NuWrap 5 also continues to be compliant to the BCA requirements for habitable areas. Volume 1, section F5.6, for sole occupancy units, the duct or wast pipe must be separated from the rooms of any sole-occupancy unit by construction with an Rw+Ctr (airbourne) not less than 40 if the adjacent room is a habitable room. NuWrap 5 exceeds this requirement with just one wrap around the pipe and a 10mm plasterboard ceiling. No additional fibre batt is required in the ceiling. Thermotec NuWrap 5 meets the requirements of all States and Territories and provided it is installed to the manufacturers' recommendations, need no further regulatory body approval or certification. NuWrap 5 is Australian made and is specified and used both throughout Australia and Internationally.
|
Thermotec Australia Pty Ltd Profile 02 9771 6400 168 Carrington Street, Revesby, NSW, 2212
|
Thermal and Acoustic Pipe Insulation |
Fire Resistant Pipe Insulation |
Foil Faced Pipe Insulation | Thermotec
Thermal Break Material E-Therm |
Closed Cell Expansion Joint Pipe Sleeve
Insulation Tape for Pipes | Thermotec
Pipe Insulation Certification for E-Flex
Flexible Pipe Insulation E-Flex |
Acoustic Pipe Insulation with Nu Wrap 5,
Thermal Pipe Insulation 4-Zero &
E-Flex Solar Pipe Insulation, Thermotec
Base Acoustic Barrier from