Ultrabond Eco Tack Solvent Free Adhesive from Mapei

Ultrabond Eco Tack
Carpet Tile Tackifier

A solvent-free non-staining acrylic-adhesive in water dispersion

Where to use
A solvent-free, non-staining acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required.

Sample Applications
Use Ultrabond Eco Tack for:

Bonding carpet tiles backed with PVC, polypropylene, fibre backed bitumen and other polymer backings onto concrete, cementitious screeds, raised access floor panels, asphalt, terrazzo, chipboard, plywood, smoothing compounds and some existing floor coverings.

Ultrabond Eco Tack is also suitable for use over underfloor heating systems (surface temperature must not exceed British Standard recommendations). The heating should be switched off at least 48 hours before and after the installation of floor covering.

In areas subject to excessive variations of temperature, and floor coverings not completely dimensionally stable, care should be taken as movement may occur causing gaping.

Coverage m2/l
Smooth backed vinyl products 8 - 10
Cushion Underlay 10 - 12
Trowel size 1.0 x 1.5 x 1.0

Spreading the adhesive
To ensure the overall release bond is achieved, Ultrabond Eco Tack may be applied by trowel, bush or roller over the entire area and allowed to dry to a transparent tacky film.

Very low VOC and contributes valuable points towards Green Star™ credits.