Ceramic or Stone Tile Cementitious Adhesive from MAPEI
High-performance, deformable, fast setting cementitious adhesive with no vertical slip, for ceramic tiles and stone material.
Classification In Compliance With ISO 13007
Keraquick S1 is an improved (2) fast setting (F) cementitious (C) adhesive and slip resistant (T) and deformable classified as C2FT S1.
Where to Use
Bonding to cement screeds, cement-based renders, cured concrete, existing floors internally and externally. For the installation of:
- ceramic and mosaic tiles of every type and stone materials that are not extremely sensitive to moisture;
- insulating materials such as expanded polystyrene and polyurethane, gypsum board, glass and rock wool, Eraclit®, foamed-concrete blocks, sound-deadening panels, etc.
Some Application Examples
- Repairs in heavily trafficked areas and when surfaces need to be put into service rapidly, such as public premises, motorway services, pedestrian passages, supermarkets, showrooms.
- Rapid installation or repairs in swimming pools, industrial plants (breweries, wine-cellars, dairies, etc.), refrigeration units.
- Rapid repair work in bathrooms, showers, kitchens, balconies, terraces.
- Installing non-absorbent flooring over existing flooring, where the setting time of other cement-based adhesives would be too slow.
- Installing marble and other stone material, even light coloured stone (for the latter, use Keraquick S1 white).
- Installing tiles onto heated screeds.
Technical Characteristics
Keraquick S1 is a grey or white powder composed of a blend of special cements, selectively-graded aggregates, synthetic resins and setting accelerators that develop high bond strength only 2-3 hours after installation.
For this reason floors and walls can be used very quickly. Floors are ready for use in 24 hours and can be walked on after only 2 hours.
By mixing Keraquick S1 with Latex Plus the deformability improves, to meet the requirements of class C2F S2 (highly deformable, fast setting, improved cementitious adhesive) according to ISO 13007.
Recommendations
Do not use Keraquick S1 in the following cases:
- on metal, rubber, PVC and linoleum surfaces;
- on walls and floors subject to extreme flexing or vibration (wood, fibre-cement boards, etc.);
- for bonding insulating panels of expanded polystyrene with protective film.
|
MAPEI Australia Profile
07 3276 5000
180 Viking Drive, Wacol, Brisbane, QLD, 4076
VISIT WEBSITE
|