Admixtures for Concrete from Mapei Australia

DYNAMON SR3

Superplasticiser based on modified acrylic polymer for ready mix concrete with low water/cement ratio extremely high mechanical strengths and long slump retention.

Dynamon SR3 is a modified acrylic-based high performance admixture.

Dynamon SR3 is especially suitable for ready mix concrete industry and wherever a strong water reduction is required, along with good development of early age strength along with an excellent slump retention for all workability classes.

Its performances make it particularly suitable for producing self-compacting concrete that require high fluidity, loss of slump in time and at the same time the reduction of the development of early strength is not particularly effected (due to the strong need of admixture necessary for the rheological performances required). For these types of concrete, the combined use of Dynamon SR3 and Viscofluid SCC, viscosity modifier, is necessary to avoid the risk of segregation and guarantee the homogeneity of the mixtures with very high slump-flow (slump-flow > 70 cm).

Add Dynamon SR3 directly to the mixture after all the other ingredients (cement, aggregates, water, other additions).

Dosage
0.5-1 litres per 100 kg of cement for traditional concrete or on fine parts (0.1 mm diameter) for self compacting concrete.

Packaging
200 l drums - 1000 l tanks. Also available in bulk on request.

MAPEI Australia Profile

07 3276 5000

180 Viking Drive, Wacol, Brisbane, QLD, 4076

VISIT WEBSITE

MAPEI Australia Profile

07 3276 5000

VISIT WEBSITE

ENQUIRE HERE