INDUSTRY STANDARDS AND APPROVALS
LEED Points Contribution - LEED Points
MR Credit 4, Recycled Content* - Up to 2 points
IEQ Credit 4.1, Low-Emitting Materials - Adhesives & Sealants - 1 point

* Using this MAPEI product may help contribute to LEED certification of projects in the categories shown above. Points are awarded based on contributions of all project materials.

WHERE TO USE

• Patching concrete floors
• Patching exterior concrete, sidewalks and driveways
• Smoothing and ramping elevation changes
• Patching finished concrete surfaces where concrete's natural gray color is desired

LIMITATIONS

• Do not install over substrates containing asbestos.
• Mapecem Quickpatch is natural light gray and can be used as final wear surface.
• Mapecem Quickpatch can be installed from featheredge to 3" (7,5 cm) neat in confined areas.
• Mapecem Quickpatch can be primed and covered with a leveler, MAPEI's Concrete Renew™ or another topping in as little as 30 minutes depending on temperature.
• Mapecem Quickpatch can be colored with iron oxide pigments and liquid color packs. Verify compatibility before use.
• Mapecem Quickpatch is compatible with most sealers, dyes and concrete stains.
• Mapecem Quickpatch can be used for exterior concrete repairs and has excellent resistance to freeze/thaw cycles.
• Mapecem Quickpatch can be applied from 41°F to 95°F (5°C to 35°C). Allow for extra cure time when temperatures are below 65°F (18°C). Follow ACI guidelines when installing above 85°F (29°C).

Mapecem Quickpatch Data Sheet