Waterproofing & Salt Prevention from Masonry Waterproofing Systems

EVO-DAMPSEAL is for waterproofing and salt prevention under Acrylic and enamel paint coatings. All bare masonry ands brick surfaces should be given a primer coat of EVO-DAMPSEAL prior to painting.

Up to 100mm penetrating coloured, water based static/hydrostatic impregnate tested to 4 bar (60psi).

Non toxic, non-caustic, non-flammable, inorganic polyester polymer formulation.

Waterproofs, insulates, hardens and preserves Brick, render, mortar and most natural stone permanently.

Causes a chemical reaction that solidifies the component parts of pre-cast block, masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, brick fretting, cracking, seepage as it increases the density of the substrate, increases wear capability.

APPLICATION FIELDS:

- All old or new concrete, bricks, blocks, plastering/render and masonry construction.
- Concrete floors, walls, terrazzo and most natural stone. Above or below ground.
- Historical monuments, public buildings and new or old constructions affected by pollution.

ADVANTAGES:

• Prevents saponification of paints,
• Prevents blistering.
• Suitable for Acrylic or Enamel coatings
• Safe for users and adjacent areas, it does not require special protection equipment.
• Non-corrosive, non-toxic and non-flammable.
• Environmentally friendly. Saves hazardous classified materials transportation cost.
• Problem free bond for paint, floor coverings.
• Permanently waterproofs and preserves.
• Suitable over weak and old substrates.