Earth Friendly Waterproofing from Masonry Waterproofing Systems

EVO-BLOCKSEAL is an earth friendly waterproofing system, based on advanced acrylic polyester polymer technology.

EVO-BLOCKSEAL - Penetrating up to 100mm, inorganic transparent water based impregnate. Outperforming all silane and standard acrylic solutions. Negative pressure to 4 Bar (60 psi).

APPLICATION FIELDS:
- All old or new concrete blocks, masonry used in Block wall construction.

ADVANTAGES:

• Suitable over weak and old substrates.
• 50 to100mm masonry penetrating saturant.
• Prevents saponification of paints, does not contain oils or solvents.
• Prevents efflorescence.
• Safe for users and adjacent areas, it does not require special protection equipments.
• Non-corrosive, non-toxic and non-flammable.
• Environmentally friendly. Saves hazardous classified materials transportation cost.
• Problem free bond for paint.
• Can be rendered or painted.
• Will not harm glass, tiles or aluminium.
• Permanently waterproofs and preserves, Concrete Blocks, Cement Bricks and Sandstone.
• Dries clear with a slight sheen.

SURFACE PREPARATION:

• Preparation of the surface
• Fill all holes and cracks

Clean the surface to be treated to remove dust, grease, salts, or unsound particles and loose or cracked paint, to optimize the penetration of EVO-BLOCKSEAL.
It is critical that missing mortar and cracks are repaired prior to sealing with a suitable cement repair mortar.
Surfaces to be treated must be clean and dry.